GR38-A UNIISO plum jaw coupling, 12 mm to 40 mm bores, 80 mm OD, 114 mm long
UNIISO · plum
Use it
(import "parts/coupling/GR38-A.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 80 |
| length | 114 |
| bore | 12 |
| bore-b | 40 |
| hex-bore | 0 |
| screw-diameter | 8 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 27 numbers in its record
| bore-range-mm | 12, 40 |
| outer-diameter | 80 |
| length | 114 |
| bore | 12 |
| bore-b | 40 |
| hex-bore | 0 |
| screw-diameter | 8 |
| split-gap | 0.8 |
| screw-end-offset | 20.52 |
| screws-per-end | 1 |
| hub-length | 45 |
| hub-diameter | 66 |
| jaw-count | 4 |
| jaw-span | 22.5 |
| jaw-inner-radius | 28 |
| jaw-reach | 23.7 |
| spider-diameter | 79.4 |
| spider-width | 23.4 |
| spider-inner-diameter | 38 |
| insert-clearance | 0.15 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 114 |
| rated-torque-nm | 325 |
| max-speed-rpm | 8300 |
| screw-count | 2 |
| rated-torque-92-shore-a-nm | 190 |