HC32SS JIT short helical beam coupling, 6 mm to 16 mm bores, 32 mm OD, 32 mm long

JIT via MISUMI Japan · beam

Use it

(import "parts/coupling/HC32SS.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.

All 24 numbers in its record

bore-range-mm	6, 16
stock-bores-mm	6, 6.35, 8, 10, 12, 14, 15, 16
outer-diameter	32
length	32
bore	6
bore-b	16
hex-bore	0
screw-diameter	5
split-gap	0.8
screw-end-offset	5
screws-per-end	2
hub-length	10
helix-pitch	4
slot-width	0.45
axis	0, 0, 1
end-a-z	0
end-b-z	32
rated-torque-nm	3.5
max-torque-nm	7
max-angular-misalignment-deg	3
max-parallel-misalignment-mm	0.15
max-axial-misalignment-mm	0.3
max-speed-rpm	7000
screw-count	4