HC42S JIT helical beam coupling, 10 mm to 25 mm bores, 42 mm OD, 45 mm long

JIT via MISUMI Japan · beam

Use it

(import "parts/coupling/HC42S.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.

All 24 numbers in its record

bore-range-mm	10, 25
stock-bores-mm	10, 12, 14, 15, 16, 18, 19, 20, 22, 24, 25
outer-diameter	42
length	45
bore	10
bore-b	25
hex-bore	0
screw-diameter	6
split-gap	0.8
screw-end-offset	8
screws-per-end	2
hub-length	16
helix-pitch	4.333333
slot-width	0.45
axis	0, 0, 1
end-a-z	0
end-b-z	45
rated-torque-nm	7.4
max-torque-nm	14.8
max-angular-misalignment-deg	3
max-parallel-misalignment-mm	0.15
max-axial-misalignment-mm	0.3
max-speed-rpm	6000
screw-count	4