MCL-8-F Ruland one-piece clamp shaft collar, 8 mm bore, 18 mm OD, 9 mm wide
Ruland · collar-clamp
Use it
(import "parts/coupling/MCL-8-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 18 |
| length | 9 |
| bore | 8 |
| bore-b | 8 |
| hex-bore | 0 |
| screw-diameter | 3 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 20 numbers in its record
| page | 8 |
| bore-range-mm | 8, 8 |
| stock-bores-mm | 8 |
| width-mm | -0.25, 0.08 |
| outer-diameter | 18 |
| length | 9 |
| bore | 8 |
| bore-b | 8 |
| hex-bore | 0 |
| screw-diameter | 3 |
| split-gap | 0.8 |
| screw-end-offset | 1.62 |
| screws-per-end | 1 |
| screw-location | 6.5 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 9 |
| screw-location-r-mm | 6.5 |
| hardware-clearance-diameter-mm | 22.4 |
| screw-count | 1 |