MSP-26-F Ruland two-piece clamp shaft collar, 26 mm bore, 48 mm OD, 15 mm wide
Ruland · collar-split
Use it
(import "parts/coupling/MSP-26-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 48 |
| length | 15 |
| bore | 26 |
| bore-b | 26 |
| hex-bore | 0 |
| screw-diameter | 6 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 20 numbers in its record
| page | 9 |
| bore-range-mm | 26, 26 |
| stock-bores-mm | 26 |
| width-mm | -0.25, 0.08 |
| outer-diameter | 48 |
| length | 15 |
| bore | 26 |
| bore-b | 26 |
| hex-bore | 0 |
| screw-diameter | 6 |
| split-gap | 0.8 |
| screw-end-offset | 2.7 |
| screws-per-end | 1 |
| screw-location | 19 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 15 |
| screw-location-r-mm | 19 |
| hardware-clearance-diameter-mm | 54.7 |
| screw-count | 2 |