SC-8-F Ruland set screw shaft collar, 12.7 mm (1/2 in) bore, 25.4 mm OD, 11.13 mm wide
Ruland · collar-set
Use it
(import "parts/coupling/SC-8-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 25.4 |
| length | 11.1252 |
| bore | 12.7 |
| bore-b | 12.7 |
| hex-bore | 0 |
| screw-diameter | 6.35 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 19 numbers in its record
| page | 6 |
| bore-range-mm | 12.7, 12.7 |
| stock-bores-mm | 12.7 |
| width-mm | -0.254, 0.0762 |
| bore-mm | 0.0127, 0.0508 |
| outer-diameter | 25.4 |
| length | 11.1252 |
| bore | 12.7 |
| bore-b | 12.7 |
| hex-bore | 0 |
| screw-diameter | 6.35 |
| split-gap | 0.8 |
| screw-end-offset | 2.002536 |
| screws-per-end | 1 |
| screw-location | 0 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 11.1252 |
| screw-count | 1 |