SP-5-F Ruland two-piece clamp shaft collar, 7.94 mm (5/16 in) bore, 17.46 mm OD, 7.14 mm wide
Ruland · collar-split
Use it
(import "parts/coupling/SP-5-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 17.4625 |
| length | 7.1374 |
| bore | 7.9375 |
| bore-b | 7.9375 |
| hex-bore | 0 |
| screw-diameter | 2.8448 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 20 numbers in its record
| page | 5 |
| bore-range-mm | 7.9375, 7.9375 |
| stock-bores-mm | 7.9375 |
| width-mm | -0.254, 0.0762 |
| outer-diameter | 17.4625 |
| length | 7.1374 |
| bore | 7.9375 |
| bore-b | 7.9375 |
| hex-bore | 0 |
| screw-diameter | 2.8448 |
| split-gap | 0.8 |
| screw-end-offset | 1.284732 |
| screws-per-end | 1 |
| screw-location | 6.35 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 7.1374 |
| screw-location-r-mm | 6.35 |
| hardware-clearance-diameter-mm | 21.2852 |
| screw-count | 2 |