SP-8HX-F Ruland two-piece clamp shaft collar, 12.7 mm (1/2 in) hex bore, 28.57 mm OD, 10.31 mm wide
Ruland · collar-split
Use it
(import "parts/coupling/SP-8HX-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 28.575 |
| length | 10.3124 |
| bore | 12.7 |
| bore-b | 12.7 |
| hex-bore | 1 |
| screw-diameter | 4.1656 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 19 numbers in its record
| bore-range-mm | 12.7, 12.7 |
| stock-bores-mm | 12.7 |
| width-mm | -0.254, 0.0762 |
| outer-diameter | 28.575 |
| length | 10.3124 |
| bore | 12.7 |
| bore-b | 12.7 |
| hex-bore | 1 |
| screw-diameter | 4.1656 |
| split-gap | 1.6002 |
| screw-end-offset | 1.856232 |
| screws-per-end | 1 |
| screw-location | 10.3124 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 10.3124 |
| screw-location-r-mm | 10.3124 |
| hardware-clearance-diameter-mm | 32.5374 |
| screw-count | 2 |