L298N-43x43-GENERIC motor driver board, 43×43 mm

Use it

(import "parts/electronics/L298N-43x43-GENERIC.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

length43
width43
corner0.5
pcb-thickness1.6
notch-width0
notch-depth0
All 21 numbers in its record
pin-length5.8
length43
width43
corner0.5
pcb-thickness1.6
notch-width0
notch-depth0
mount-holes-18, -18, 3, -18, 18, 3, 18, -18, 3, 18, 18, 3
pins-6.35, -18, -3.81, -18, -1.27, -18, 1.27, -18, 3.81, -18, 6.35, -18
pin-square0.64
pin-bottom-5.8
pin-top1.9
blocks-16, -5, 8, 15, 1.4, 12, 0.03, 0.3, 0.16, 16, -5, 8, 15, 1.4, 12, 0.03, 0.3, 0.16, 0, -16, 15, 7, 1.4, 12, 0.03, 0.3, 0.16
cylinders-11, 7, 3.5, 1.4, 12, 0.72, 0.73, 0.75, 11, 7, 3.5, 1.4, 12, 0.72, 0.73, 0.75
pcb-color0.5, 0.035, 0.025
heat-sinks0, 8, 24, 13, 1.4, 3, 27, 8
holes-mm-18, -18, 3, -18, 18, 3, 18, -18, 3, 18, 18, 3
pin-stations-mm-6.35, -18, -3.81, -18, -1.27, -18, 1.27, -18, 3.81, -18, 6.35, -18
rigid-envelope-mm-21.5, -21.5, -5.8, 21.5, 21.5, 27
rear-connector10
wire-bend15