RC522-RFID-GENERIC RF module, 60×40 mm

Use it

(import "parts/electronics/RC522-RFID-GENERIC.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

length60
width40
corner0.5
pcb-thickness1.6
notch-width0
notch-depth0
All 20 numbers in its record
pin-length5.8
length60
width40
corner0.5
pcb-thickness1.6
notch-width0
notch-depth0
mount-holes-27, -17, 3, -27, 17, 3, 27, -17, 3, 27, 17, 3
pins-8.89, -17, -6.35, -17, -3.81, -17, -1.27, -17, 1.27, -17, 3.81, -17, 6.35, -17, 8.89, -17
pin-square0.64
pin-bottom-5.8
pin-top1.9
blocks15, -8, 8, 8, 1.4, 3.7, 0.065, 0.07, 0.075
pcb-color0.03, 0.15, 0.48
traces0, -10, 48, 0.45, 0, 10, 48, 0.45, -24, 0, 0.45, 20, 24, 0, 0.45, 20, 0, -9, 46, 0.45, 0, 9, 46, 0.45, -23, 0, 0.45, 18, 23, 0, 0.45, 18, 0, -8, 44, 0.45, 0, 8, 44, 0.45, -22, 0, 0.45, 16, 22, 0, 0.45, 16, 0, -7, 42, 0.45, 0, 7, 42, 0.45, -21, 0, 0.45, 14, 21, 0, 0.45, 14
holes-mm-27, -17, 3, -27, 17, 3, 27, -17, 3, 27, 17, 3
pin-stations-mm-8.89, -17, -6.35, -17, -3.81, -17, -1.27, -17, 1.27, -17, 3.81, -17, 6.35, -17, 8.89, -17
rigid-envelope-mm-30, -20, -5.8, 30, 20, 3.7
rear-connector10
wire-bend15