217-6515 Falcon 500 motor long shaft with integrated Talon FX, 60 mm body, 7.444 mm splined shaft
MPN 217-6515 · frc-motor
Use it
(import "parts/frc-motor/217-6515.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| body-diameter | 60 |
| body-length | 64 |
| pilot-diameter | 19.05 |
| pilot-height | 4 |
| shaft-tip | 35.19 |
| shaft-diameter | 7.444 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| motor | mount | (0, 0, 0) | (1, 0, 0) | (0, 0, 1) |
| motor | shaft | (0, 0, 35.19) | (1, 0, 0) | (0, 0, 1) |
| housing | mount | (0, 0, 0) | (1, 0, 0) | (0, 0, 1) |
| rotor | shaft | (0, 0, 35.19) | (1, 0, 0) | (0, 0, 1) |
| drive (assembly) | mount | (0, 0, 0) | (1, 0, 0) | (0, 0, 1) |
| drive (assembly) | shaft | (0, 0, 35.19) | (1, 0, 0) | (0, 0, 1) |
All 53 numbers in its record
| body-diameter | 60 |
| body-length | 64 |
| pilot-diameter | 19.05 |
| pilot-height | 4 |
| shaft-tip | 35.19 |
| shaft-diameter | 7.444 |
| shaft-style | 2 |
| mount-holes | 25.4, 0, 4.04, 11, 12.7, 21.99705, 4.04, 11, -12.7, 21.99705, 4.04, 11, -25.4, 0, 4.04, 11, -12.7, -21.99705, 4.04, 11, 12.7, -21.99705, 4.04, 11 |
| pitch-circle | 50.8 |
| mount-angles-deg | 0, 60, 120, 180, 240, 300 |
| mount-hole-depth | 11 |
| key-width | 0 |
| key-floor | 0 |
| key-start | 0 |
| key-end | 0 |
| shaft-end-bore | 3.4544 |
| shaft-end-depth | 15.08 |
| spline-teeth | 14 |
| spline-module | 0.5 |
| spline-pa | 30 |
| through-hex | 0 |
| rear-boss-length | 25.85 |
| rear-boss-diameter | 46 |
| visual-style | 3 |
| front-bevel | 0.8 |
| front-cap-length | 7 |
| rear-cap-length | 8 |
| rear-taper | 4 |
| seam-depth | 0.4 |
| seam-half-width | 0.25 |
| vent-count | 0 |
| vent-depth | 2 |
| vent-width | 4 |
| vent-length | 5 |
| vent-z | -71.25 |
| wire-width | 12 |
| wire-length | 4 |
| wire-z | 5 |
| label-half-width | 14 |
| label-height | 3 |
| label-z-fraction | 0.52 |
| shaft-collar | 9.95, 5, 0.5, 7.45 |
| spline-backlash | 0.029 |
| spline-root-radius | 2.983 |
| spline-fillet-radius | 0.235 |
| spline-tip-chamfer | 0.472 |
| voltage-v | 12 |
| free-speed-rpm | 6380 |
| stall-torque-nm | 4.69 |
| stall-current-a | 257 |
| mass-g | 498.9516 |
| mount-thread-major-mm | 4.826 |
| mount-thread-pitch-mm | 0.79375 |