Playing With Fusion PWR-10001 XT30 power distribution module (1.5 x 0.875 in footprint)

Use it

(import "parts/frc-motor/PWF-PWR-10001.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

width30.15
length46.61
height13.92

Frames

Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.

OfFrameOriginxz
controllermount(0, 0, 0)(1, 0, 0)(0, 0, -1)
All 8 numbers in its record
width30.15
length46.61
height13.92
cases-15.075, 15.075, -23.305, 23.305, 3.5, 0, 12.0525, 0.5, 0.5, 0, 0
blocks-4.8528, 4.8528, -23.555, -14.555, 0.1, 5.17, 10.07, -4.8528, 4.8528, 19.355, 29.505, 0.1, 5.17, 10.07
cuts-23.1125, -7.6125, -31.05, -15.55, 3.5, 7.0525, 23.5, -23.1125, -7.6125, 15.55, 31.05, 3.5, 7.0525, 23.5, 7.6125, 23.1125, -31.05, -15.55, 3.5, 7.0525, 23.5, 7.6125, 23.1125, 15.55, 31.05, 3.5, 7.0525, 23.5, -11.2, 11.2, -9.355, 9.355, 0.75, 8.1025, 23.5
holes-7.825, 5.87, 2, 5, 14.5, -2.825, 5.87, 2, 5, 14.5, 2.825, 5.87, 2, 5, 14.5, 7.825, 5.87, 2, 5, 14.5, -7.825, 0, 2, 5, 14.5, -2.825, 0, 2, 5, 14.5, 2.825, 0, 2, 5, 14.5, 7.825, 0, 2, 5, 14.5, -7.825, -5.87, 2, 5, 14.5, -2.825, -5.87, 2, 5, 14.5, 2.825, -5.87, 2, 5, 14.5, 7.825, -5.87, 2, 5, 14.5, -11.1125, -19.05, 3.5, -1.5, 23.5, -11.1125, 19.05, 3.5, -1.5, 23.5, 11.1125, -19.05, 3.5, -1.5, 23.5, 11.1125, 19.05, 3.5, -1.5, 23.5
ribs-9.61, -1.04, 4.025, 7.715, 1, 8.1025, 13.92, 1.04, 9.61, 4.025, 7.715, 1, 8.1025, 13.92, -9.61, -1.04, -1.845, 1.845, 1, 8.1025, 13.92, 1.04, 9.61, -1.845, 1.845, 1, 8.1025, 13.92, -9.61, -1.04, -7.715, -4.025, 1, 8.1025, 13.92, 1.04, 9.61, -7.715, -4.025, 1, 8.1025, 13.92