Playing With Fusion PWR-10002 XT30 power distribution module (1.75 x 0.625 in footprint)

Use it

(import "parts/frc-motor/PWF-PWR-10002.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

width21.5
length68.22
height13.92

Frames

Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.

OfFrameOriginxz
controllermount(0, 0, 0)(1, 0, 0)(0, 0, -1)
All 8 numbers in its record
width21.5
length68.22
height13.92
cases-10.75, 10.75, -34.11, 34.11, 3.25, 0, 12.0525, 0.5, 0.5, 0, 0
blocks-4.8528, 4.8528, -34.36, -25.36, 0.1, 5.17, 10.07, -4.8528, 4.8528, 30.16, 40.31, 0.1, 5.17, 10.07
cuts-19.9375, -4.6875, -25.475, -18.975, 3.25, 7.0525, 23.5, -19.9375, -4.6875, 18.975, 25.475, 3.25, 7.0525, 23.5, 4.6875, 19.9375, -25.475, -18.975, 3.25, 7.0525, 23.5, 4.6875, 19.9375, 18.975, 25.475, 3.25, 7.0525, 23.5, -5.875, 5.875, -18.16, 18.16, 0.75, 8.1025, 23.5
holes-2.5, -14.675, 2, 5, 14.5, 2.5, -14.675, 2, 5, 14.5, -2.5, -8.805, 2, 5, 14.5, 2.5, -8.805, 2, 5, 14.5, -2.5, -2.935, 2, 5, 14.5, 2.5, -2.935, 2, 5, 14.5, -2.5, 2.935, 2, 5, 14.5, 2.5, 2.935, 2, 5, 14.5, -2.5, 8.805, 2, 5, 14.5, 2.5, 8.805, 2, 5, 14.5, -2.5, 14.675, 2, 5, 14.5, 2.5, 14.675, 2, 5, 14.5, -7.9375, -22.225, 3.5, -1.5, 23.5, -7.9375, 22.225, 3.5, -1.5, 23.5, 7.9375, -22.225, 3.5, -1.5, 23.5, 7.9375, 22.225, 3.5, -1.5, 23.5
ribs-4.285, 4.285, -16.52, -12.83, 1, 8.1025, 13.92, -4.285, 4.285, -10.65, -6.96, 1, 8.1025, 13.92, -4.285, 4.285, -4.78, -1.09, 1, 8.1025, 13.92, -4.285, 4.285, 1.09, 4.78, 1, 8.1025, 13.92, -4.285, 4.285, 6.96, 10.65, 1, 8.1025, 13.92, -4.285, 4.285, 12.83, 16.52, 1, 8.1025, 13.92