REV-21-1652-SPARK-FLEX NEO Vortex motor docked to SPARK Flex (no output adapter), 60 mm body, 1/2 in through-hex
MPN REV-21-1652-SPARK-FLEX · frc-motor
Use it
(import "parts/frc-motor/REV-21-1652-SPARK-FLEX.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| body-diameter | 60 |
| body-length | 79.7 |
| pilot-diameter | 0 |
| pilot-height | 0 |
| shaft-tip | 0 |
| shaft-diameter | 0 |
All 56 numbers in its record
| body-diameter | 60 |
| body-length | 79.7 |
| pilot-diameter | 0 |
| pilot-height | 0 |
| shaft-tip | 0 |
| shaft-diameter | 0 |
| shaft-style | 0 |
| mount-holes | 25.4, 0, 4, 6.3, 17.96051, 17.96051, 4, 6.3, -17.96051, 17.96051, 4, 6.3, -25.4, 0, 4, 6.3, -17.96051, -17.96051, 4, 6.3, 17.96051, -17.96051, 4, 6.3, 13.25, 22.37, 6.5, 3.25, 13.25, 22.37, 3.4, 22.2, -13.25, 22.37, 6.5, 3.25, -13.25, 22.37, 3.4, 22.2, -13.25, -22.37, 6.5, 3.25, -13.25, -22.37, 3.4, 22.2, 13.25, -22.37, 6.5, 3.25, 13.25, -22.37, 3.4, 22.2 |
| pitch-circle | 50.8 |
| mount-angles-deg | 0, 45, 135, 180, 225, 315 |
| mount-hole-depth | 6.3 |
| key-width | 0 |
| key-floor | 0 |
| key-start | 0 |
| key-end | 0 |
| shaft-end-bore | 0 |
| shaft-end-depth | 0 |
| spline-teeth | 0 |
| spline-module | 0 |
| spline-pa | 0 |
| through-hex | 12.7 |
| rear-boss-length | 0 |
| rear-boss-diameter | 0 |
| visual-style | 8 |
| front-bevel | 0.8 |
| front-cap-length | 26.5 |
| rear-cap-length | 8 |
| rear-taper | 2 |
| seam-depth | 0.4 |
| seam-half-width | 0.25 |
| vent-count | 0 |
| vent-depth | 2 |
| vent-width | 4 |
| vent-length | 5 |
| vent-z | -69.7 |
| wire-width | 16 |
| wire-length | 4 |
| wire-z | 62.7 |
| label-half-width | 14 |
| label-height | 5 |
| label-z-fraction | 0.65 |
| usb-width | 12 |
| usb-height | 4 |
| can-width | 7 |
| can-height | 5 |
| rotor-bore-profiles | -1, 1, 0, 17.25, 1, 0, 16.25, 0, 0, 15.75, -0.5, 0, 15.75, -1.6, 0, 11.25, -1.6, 0.414214, 8.25, -4.6, 0, 8.25, -18.8, 0, 9, -19.55, 0, 9.25, -19.55, 0, 9.25, -19.7, 0, 7.75, -19.7, 0, 7.25, -20.2, 0, 7.25, -21.654, -0.414214, 6.9538, -21.95, 0, 6.35, -26.536, 0, -1, -26.536, 0, -1, -75.7, 0, 8.375, -75.7, -0.414214, 8.875, -76.2, 0, 8.875, -79.2, 0, 9.375, -79.7, 0, 10.375, -80.7, 0, -1, -80.7, 0 |
| rotor-hex-z | -75.7, -23.807 |
| voltage-v | 12 |
| free-speed-rpm | 6784 |
| stall-torque-nm | 3.6 |
| stall-current-a | 211 |
| mass-g | 586.5 |
| motor-mass-g | 444.5 |
| controller-mass-with-wires-g | 142 |
| mount-thread-major-mm | 4.826 |
| mount-thread-pitch-mm | 0.79375 |