REV-21-2827 NEO Vortex Falcon-compatible 14T spline shaft
MPN REV-21-2827 · frc-vortex-shaft
Use it
(import "parts/frc-motor/REV-21-2827.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| hex-across-flats | 12.69 |
| hex-top-source-z | 12.70026 |
| source-z-shift | -40.2743 |
| shaft-tip | 29.9001 |
| rear-tip | -71.6999 |
| shaft-diameter | 7.98 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| adapter | shaft | (0, 0, 29.9001) | (1, 0, 0) | (0, 0, 1) |
All 22 numbers in its record
| axial-profile | -1, -31.42558, 0, 3.75, -31.42558, 0, 4, -31.17558, 0, 4, -2.5, -0.396157, 6.345, -0.00481, 0, 6.345, 0, 0, 6.875, 0.53, 0, 6.875, 12.17026, 0, 6.345, 12.70026, 0, 6.345, 13.70026, 0, 7.315826, 21.07442, 0, 7.315826, 22.11917, 0.362842, 6.904586, 22.61125, -0.362842, 5, 24.8902, 0, 5, 34.1844, 0.349779, 4.766898, 34.47685, -0.349779, 3.9899, 35.4517, 0, 3.9899, 39.9844, 0, 3.72, 39.9844, 0, 3.72, 69.7463, 0, 3.2919, 70.1744, 0, -1, 70.1744, 0 |
| hex-across-flats | 12.69 |
| hex-top-source-z | 12.70026 |
| source-z-shift | -40.2743 |
| shaft-tip | 29.9001 |
| rear-tip | -71.6999 |
| shaft-diameter | 7.98 |
| spline-teeth | 14 |
| spline-module | 0.5 |
| spline-pa | 30 |
| spline-tip-radius | 3.72 |
| spline-root-radius | 3.2919 |
| spline-fillet-radius | 0 |
| spline-cutter-radius | 12 |
| spline-start-source-z | 39.9844 |
| front-bore-radius | 1.7272 |
| front-bore-floor | 44.7744 |
| front-drill-point | 43.7366 |
| rear-bore-radius | 2.0193 |
| rear-bore-floor | 17.57442 |
| rear-drill-point | 18.78774 |
| mass-g | 52 |