REV-21-1964 #25 chain sprocket, 48 teeth, MAXSpline bore
sprocket-ansi
Use it
(import "parts/frc-structure/REV-21-1964.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 48 |
| pitch-diameter | 97.0902 |
| outer-diameter | 100.3922 |
| face-width | 3 |
| width | 3 |
| hub-diameter | 0 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| part | back | (0, 0, 0) | (1, 0, 0) | (0, 0, -1) |
| part | front | (0, 0, 3) | (1, 0, 0) | (0, 0, 1) |
All 29 numbers in its record
| teeth | 48 |
| pitch-diameter | 97.0902 |
| outer-diameter | 100.3922 |
| face-width | 3 |
| width | 3 |
| hub-diameter | 0 |
| bore-af | 0 |
| bore-round | 0 |
| hub-chamfer | 0 |
| hub-fillet | 0 |
| notch-width | 0 |
| notch-depth | 0 |
| notch-faces | 0 |
| notch-angle | 90 |
| side-relief-depth | 0.70625 |
| side-relief-slope | 9.6 |
| tooth-clock | 0 |
| spline-teeth | 0 |
| spline-module | 0 |
| spline-pa | 0 |
| spline-backlash | 0 |
| spline-minor | 0 |
| spline-major | 0 |
| plates | 0 |
| holes | 25.4, 0, 5, 12.7, 21.997, 5, -12.7, 21.997, 5, -25.4, 0, 5, -12.7, -21.997, 5, 12.7, -21.997, 5, 25.4, 12.7, 5, 25.4, -12.7, 5, -25.4, 12.7, 5, -25.4, -12.7, 5, 38.1, 0, 5, 19.05, 32.9956, 5, -19.05, 32.9956, 5, -38.1, 0, 5, -19.05, -32.9956, 5, 19.05, -32.9956, 5 |
| mass-g | 50 |
| color | 0.73, 0.75, 0.77 |
| metallic | 0.65 |
| roughness | 0.3 |