WCP-1420 HTD 5M timing pulley, 15 teeth, 10.29 mm belt slot, 1/2 in hex bore
htd5-pulley
Use it
(import "parts/frc-structure/WCP-1420.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 15 |
| pitch | 5 |
| pitch-diameter | 23.87 |
| inner-width | 10.287 |
| width | 14.2875 |
| flange-diameter | 28 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| part | back | (0, 0, 0) | (1, 0, 0) | (0, 0, -1) |
| part | front | (0, 0, 14.2875) | (1, 0, 0) | (0, 0, 1) |
All 33 numbers in its record
| teeth | 15 |
| pitch | 5 |
| pitch-diameter | 23.87 |
| inner-width | 10.287 |
| width | 14.2875 |
| flange-diameter | 28 |
| flange-thickness | 1 |
| hub-diameter | 17.8 |
| bore-af | 12.7508 |
| bore-round | 0 |
| web | 0 |
| pocket-ri | 0 |
| pocket-ro | 0 |
| spline-teeth | 0 |
| flare-radius | 12 |
| flare-angle | 10 |
| boss-diameter | 0 |
| boss-width | 0 |
| tooth-clock | 5.727068 |
| notch-width | 1.5875 |
| notch-depth | 1 |
| notch-faces | 1 |
| notch-angle | 90 |
| vertices | 11.34424, 0.3615761, 10.80498, 0.7659793, 10.18239, 3.695025, 10.54033, 4.077739, 10.51054, 4.283802, 14.2147, 5.793511, 15.34221, 0.4890038 |
| add | 10.43128, 2.217237, 1.4986, -0.9781476, -0.2079117, -10.72812 |
| remove | 10.91266, 0.3478202, 0.4318, 0.599962, 0.8000285, 7.095384, 10.11068, 4.120828, 0.4318, 0.7303582, -0.6830643, 4.912855, 10.11068, 4.120828, 0.4318, 0.9897172, 0.143038, 11.01521 |
| tooth-outer-radius | 11.35 |
| tooth-profile-probe | 8.965428, 1.905661, 0.9781476, 0.2079117 |
| flange-edge-angle | 0 |
| mass-g | 9.071847 |
| color | 0.2980392, 0.2980392, 0.2980392 |
| metallic | 0.65 |
| roughness | 0.3 |