WCP-2103 #25 chain sprocket, 30 teeth, 1/2 in hex bore
sprocket-ansi
Use it
(import "parts/frc-structure/WCP-2103.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 30 |
| pitch-diameter | 60.749 |
| outer-diameter | 64.22621 |
| face-width | 2.794 |
| width | 9.525 |
| hub-diameter | 19.05 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| part | back | (0, 0, 0) | (1, 0, 0) | (0, 0, -1) |
| part | front | (0, 0, 9.525) | (1, 0, 0) | (0, 0, 1) |
All 28 numbers in its record
| teeth | 30 |
| pitch-diameter | 60.749 |
| outer-diameter | 64.22621 |
| face-width | 2.794 |
| width | 9.525 |
| plates | 3.3655 |
| hub-diameter | 19.05 |
| bore-af | 12.7508 |
| bore-round | 0 |
| hub-chamfer | 0.508 |
| hub-fillet | 1 |
| notch-width | 1.5875 |
| notch-depth | 0.79375 |
| notch-faces | 1 |
| notch-angle | 90 |
| side-relief-depth | 0.79375 |
| side-relief-slope | 4 |
| tooth-clock | 0 |
| spline-teeth | 0 |
| spline-module | 0 |
| spline-pa | 0 |
| spline-backlash | 0 |
| spline-minor | 0 |
| spline-major | 0 |
| mass-g | 23.5868 |
| color | 0.7921569, 0.8196078, 0.9333333 |
| metallic | 0.65 |
| roughness | 0.3 |