WCP-2262 HTD 5M timing pulley, 36 teeth, 18.23 mm belt slot,
htd5-pulley
Use it
(import "parts/frc-structure/WCP-2262.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 36 |
| pitch | 5 |
| pitch-diameter | 57.2958 |
| inner-width | 18.225 |
| width | 22.225 |
| flange-diameter | 60 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| part | back | (0, 0, 0) | (1, 0, 0) | (0, 0, -1) |
| part | front | (0, 0, 22.225) | (1, 0, 0) | (0, 0, 1) |
All 35 numbers in its record
| teeth | 36 |
| pitch | 5 |
| pitch-diameter | 57.2958 |
| inner-width | 18.225 |
| width | 22.225 |
| flange-diameter | 60 |
| flange-thickness | 1 |
| hub-diameter | 11.1124 |
| bore-af | 0 |
| bore-round | 0 |
| web | 3.175 |
| pocket-ri | 5.5562 |
| pocket-ro | 21.1187 |
| spline-teeth | 15 |
| spline-module | 0.5 |
| spline-pa | 30 |
| spline-backlash | -0.027 |
| spline-minor | 7.134 |
| spline-major | 8.42 |
| flare-radius | 28 |
| flare-angle | 9.5 |
| boss-diameter | 47 |
| boss-width | 0.75 |
| tooth-clock | 5 |
| notch-width | 1.5875 |
| notch-depth | 0.7938 |
| notch-faces | 1 |
| notch-angle | 0 |
| tooth-outer-radius | 0 |
| tooth-profile-probe | 0, 0, 0, 0 |
| flange-edge-angle | 0 |
| mass-g | 66.67808 |
| color | 0.2980392, 0.2980392, 0.2980392 |
| metallic | 0.65 |
| roughness | 0.3 |