48 pitch pinion gear test variant, 20 teeth, 4 mm bore
Use it
(import "parts/gear/record-variants.ik" as p)
In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 20 |
| pressure-angle | 20 |
| backlash | 0.03 |
| face-width | 5.2 |
| length | 10 |
| hub-diameter | 10 |
All 17 numbers in its record
| bore | 4, 4 |
| hub-diameter | 10, 10 |
| length | 10, 10 |
| face-width | 5.2, 5.2 |
| teeth | 20 |
| pressure-angle | 20 |
| backlash | 0.03 |
| set-screw-z | 6.4 |
| set-screw-length | 3.175 |
| set-screw-major | 3.175 |
| set-screw-pitch | 0.635 |
| set-screw-hex-af | 1.5875 |
| set-screw-socket-depth | 1.1 |
| set-screw-tip-x | 1.65 |
| set-screw-tap-clearance | 0.04 |
| set-screw-cup-radius | 0.65 |
| set-screw-cup-depth | 0.35 |