ULN2003 stepper motor driver board (X113647, for the 28BYJ-48), 32×34.6 mm, XH 5-pin motor header
uln2003-board
Use it
(import "parts/geared-stepper/ULN2003-X113647.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| board-x | 32 |
| board-y | 34.6 |
| board-thickness | 1.6 |
| hole-diameter | 3 |
| hole-spacing-x | 26.4 |
| hole-spacing-y | 29.6 |
Frame of reference
board centre at the origin, the PCB's bottom face at z = 0 (top at z = 1.6), components in +z; the LED row along the +y edge, the IN1-IN7 header along the -y edge, the XH motor header near the -x side with its latch toward +y, the power/jumper header along x = +10.8
All 37 numbers in its record
| board-x | 32 |
| board-y | 34.6 |
| board-thickness | 1.6 |
| hole-diameter | 3 |
| hole-spacing-x | 26.4 |
| hole-spacing-y | 29.6 |
| jst-x | -5.83 |
| jst-y | 5.69 |
| jst-circuits | 5 |
| jst-pitch | 2.5 |
| dip-x | -4.7 |
| dip-y | -3.8 |
| dip-pins | 16 |
| in-header-y | -10.82 |
| in-header-x0 | -9.5 |
| in-header-pins | 4 |
| in-header-holes | 7 |
| power-header-x | 10.8 |
| power-header-y0 | -7 |
| power-header-pins | 4 |
| jumper-on-pins | 2, 3 |
| led-y | 12.7 |
| led-x0 | -10 |
| led-pitch | 5.08 |
| led-count | 4 |
| resistor-x | 11.2 |
| resistor-y0 | 10.3 |
| resistor-pitch | 2.54 |
| resistor-count | 4 |
| capacitor-x | 8.1 |
| capacitor-y | -4.3 |
| dip-length | 19.3 |
| dip-width | 6.35 |
| header-pitch | 2.54 |
| dip-pitch | 2.54 |
| dip-row-spacing | 7.62 |
| supply-v | 5, 12 |