SC10LUU long linear bushing pillow block, 10 mm shaft, 40×68×26 mm, M5 mounting
MPN SC10LUU · pillow-block
Use it
(import "parts/linear-bearing/SC10LUU.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore-diameter | 10 |
| axis-depth | 13 |
| width | 40 |
| height | 26 |
| length | 68 |
| mount-pitch-x | 46 |
All 22 numbers in its record
| bore-diameter | 10 |
| axis-depth | 13, -0.02, 0.02 |
| width | 40 |
| height | 26 |
| length | 68 |
| mount-pitch-x | 46, -0.02, 0.02 |
| mount-pitch-y | 28, -0.2, 0.2 |
| mount-thread-diameter | 5 |
| mount-thread-pitch | 0.8 |
| mount-thread-depth | 12 |
| mount-pilot-diameter | 4.3 |
| bottom-shoulder-height | 5 |
| bottom-flat-width | 22 |
| seal-band | 0.8 |
| seal-radial-width | 3.75 |
| axis-width-datum | -0.02, 0.02 |
| catalog_mass_g | 147 |
| mount_hole_centres_xyz | -23, -14, 0, -23, 14, 0, 23, -14, 0, 23, 14, 0 |
| d-axis-width-datum | 20 |
| g-shoulder-depth | 21 |
| a-top-band | 8 |
| e-width-edge-to-hole | 6 |