SC12UU linear bushing pillow block, 12 mm shaft, 42×36×28 mm, M5 mounting
MPN SC12UU · pillow-block
Use it
(import "parts/linear-bearing/SC12UU.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore-diameter | 12 |
| axis-depth | 15 |
| width | 42 |
| height | 28 |
| length | 36 |
| mount-pitch-x | 26 |
All 22 numbers in its record
| bore-diameter | 12 |
| axis-depth | 15, -0.02, 0.02 |
| width | 42 |
| height | 28 |
| length | 36 |
| mount-pitch-x | 26, -0.02, 0.02 |
| mount-pitch-y | 30.5, -0.2, 0.2 |
| mount-thread-diameter | 5 |
| mount-thread-pitch | 0.8 |
| mount-thread-depth | 12 |
| mount-pilot-diameter | 4.3 |
| bottom-shoulder-height | 4 |
| bottom-flat-width | 23.1 |
| seal-band | 0.8 |
| seal-radial-width | 3.75 |
| axis-width-datum | -0.02, 0.02 |
| catalog_mass_g | 112 |
| mount_hole_centres_xyz | -13, -15.25, 0, -13, 15.25, 0, 13, -15.25, 0, 13, 15.25, 0 |
| d-axis-width-datum | 21 |
| g-shoulder-depth | 24 |
| a-top-band | 8 |
| e-width-edge-to-hole | 5.75 |