SC8UU linear bushing pillow block, 8 mm shaft, 34×30×22 mm, M4 mounting
MPN SC8UU · pillow-block
Use it
(import "parts/linear-bearing/SC8UU.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore-diameter | 8 |
| axis-depth | 11 |
| width | 34 |
| height | 22 |
| length | 30 |
| mount-pitch-x | 18 |
All 22 numbers in its record
| bore-diameter | 8 |
| axis-depth | 11, -0.02, 0.02 |
| width | 34 |
| height | 22 |
| length | 30 |
| mount-pitch-x | 18, -0.02, 0.02 |
| mount-pitch-y | 24, -0.2, 0.2 |
| mount-thread-diameter | 4 |
| mount-thread-pitch | 0.7 |
| mount-thread-depth | 8 |
| mount-pilot-diameter | 3.4 |
| bottom-shoulder-height | 4 |
| bottom-flat-width | 18.7 |
| seal-band | 0.8 |
| seal-radial-width | 3.25 |
| axis-width-datum | -0.02, 0.02 |
| catalog_mass_g | 56 |
| mount_hole_centres_xyz | -9, -12, 0, -9, 12, 0, 9, -12, 0, 9, 12, 0 |
| d-axis-width-datum | 17 |
| g-shoulder-depth | 18 |
| a-top-band | 6 |
| e-width-edge-to-hole | 5 |