HGH25HA HIWIN HG25 long linear guide carriage, 48 mm wide, 104.6 mm long, M6 mounting
HIWIN · MPN HGH25HA · HGH profiled guide carriage
Use it
(import "parts/linear-rail/HGH25HA.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| overall-height | 40 |
| block-underside | 5.5 |
| block-width | 48 |
| core-length | 78.6 |
| block-length | 104.6 |
| mount-B | 35 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| carriage | base | (0, 0, 5.5) | (1, 0, 0) | (0, 0, -1) |
All 54 numbers in its record
| overall-height | 40 |
| block-underside | 5.5 |
| block-width | 48 |
| core-length | 78.6 |
| block-length | 104.6 |
| mount-b | 35 |
| mount-c | 50 |
| thread-diameter | 6 |
| thread-pitch | 1 |
| thread-depth | 8 |
| thread-through | 0 |
| lower-width | 48 |
| flange-thickness | 34.5 |
| channel-ceiling | 22.5 |
| corner-radius | 0.8 |
| running-clearance | 0.2 |
| seal-lip | 0.2 |
| seal-width | 0.7 |
| grease-hole-diameter | 3 |
| grease-hole-height | 33.5 |
| h | 40, 9 |
| h1 | 5.5 |
| w | 48 |
| b | 35 |
| b1 | 6.5 |
| c | 50 |
| l1 | 78.6 |
| l | 104.6 |
| n | 12.5 |
| h2 | 10 |
| g | 12 |
| mounting-hole-count | 4 |
| mounting-depth-mm | 8 |
| mounting-hole-centres-mm | -25, -17.5, 40, -25, 17.5, 40, 25, -17.5, 40, 25, 17.5, 40 |
| w_r | 23 |
| h_r | 22 |
| d | 11, 7 |
| p | 60 |
| e | 20 |
| t | 8 |
| h3 | 9 |
| k1 | 18.5 |
| k2 | 6 |
| dynamic-c-kn | 42.2 |
| static-c0-kn | 69.07 |
| static-mr-nm | 560 |
| static-mp-nm | 730 |
| static-my-nm | 730 |
| block-mass-kg | 0.69 |
| rail-mass-kg-per-m | 3.21 |
| pdf-page-offset | 3 |
| top-z | 40 |
| underside-z | 5.5 |
| datum-y | -24 |