MGN7H HIWIN MGN7 long linear guide carriage, 17 mm wide, 30.8 mm long, M2 mounting
HIWIN · MPN MGN7H · MGN profiled guide carriage
Use it
(import "parts/linear-rail/MGN7H.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| overall-height | 8 |
| block-underside | 1.5 |
| block-width | 17 |
| core-length | 21.8 |
| block-length | 30.8 |
| mount-B | 12 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| carriage | base | (0, 0, 1.5) | (1, 0, 0) | (0, 0, -1) |
All 50 numbers in its record
| overall-height | 8 |
| block-underside | 1.5 |
| block-width | 17 |
| core-length | 21.8 |
| block-length | 30.8 |
| mount-b | 12 |
| mount-c | 13 |
| thread-diameter | 2 |
| thread-pitch | 0.4 |
| thread-depth | 2.5 |
| thread-through | 0 |
| lower-width | 17 |
| flange-thickness | 6.5 |
| channel-ceiling | 5.3 |
| corner-radius | 0.8 |
| running-clearance | 0.2 |
| seal-lip | 0.2 |
| seal-width | 0.7 |
| grease-hole-diameter | 1.2 |
| grease-hole-height | 6.65 |
| h | 8, 2.3 |
| h1 | 1.5 |
| w | 17 |
| b | 12 |
| b1 | 2.5 |
| c | 13 |
| l1 | 21.8 |
| l | 30.8 |
| l-max | 31.4 |
| n | 5 |
| h2 | 1.5 |
| mounting-hole-count | 4 |
| mounting-depth-mm | 2.5 |
| mounting-hole-centres-mm | -6.5, -6, 8, -6.5, 6, 8, 6.5, -6, 8, 6.5, 6, 8 |
| w_r | 7 |
| h_r | 4.8 |
| d | 4.2, 2.4 |
| p | 15 |
| e | 5 |
| dynamic-c-kn | 1.37 |
| static-c0-kn | 1.96 |
| static-mr-nm | 7.64 |
| static-mp-nm | 4.8 |
| static-my-nm | 4.8 |
| block-mass-kg | 0.015 |
| rail-mass-kg-per-m | 0.22 |
| pdf-page-offset | 3 |
| top-z | 8 |
| underside-z | 1.5 |
| datum-y | -8.5 |