MGN9C HIWIN MGN9 linear guide carriage, 20 mm wide, 28.9 mm long, M3 mounting
HIWIN · MPN MGN9C · MGN profiled guide carriage
Use it
(import "parts/linear-rail/MGN9C.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| overall-height | 10 |
| block-underside | 2 |
| block-width | 20 |
| core-length | 18.9 |
| block-length | 28.9 |
| mount-B | 15 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| carriage | base | (0, 0, 2) | (1, 0, 0) | (0, 0, -1) |
All 50 numbers in its record
| overall-height | 10 |
| block-underside | 2 |
| block-width | 20 |
| core-length | 18.9 |
| block-length | 28.9 |
| mount-b | 15 |
| mount-c | 10 |
| thread-diameter | 3 |
| thread-pitch | 0.5 |
| thread-depth | 3 |
| thread-through | 0 |
| lower-width | 20 |
| flange-thickness | 8 |
| channel-ceiling | 7 |
| corner-radius | 0.8 |
| running-clearance | 0.2 |
| seal-lip | 0.2 |
| seal-width | 0.7 |
| grease-hole-diameter | 1.4 |
| grease-hole-height | 8.4 |
| h | 10, 3.5 |
| h1 | 2 |
| w | 20 |
| b | 15 |
| b1 | 2.5 |
| c | 10 |
| l1 | 18.9 |
| l | 28.9 |
| l-max | 29.9 |
| n | 5.5 |
| h2 | 1.8 |
| mounting-hole-count | 4 |
| mounting-depth-mm | 3 |
| mounting-hole-centres-mm | -5, -7.5, 10, -5, 7.5, 10, 5, -7.5, 10, 5, 7.5, 10 |
| w_r | 9 |
| h_r | 6.5 |
| d | 6, 3.5 |
| p | 20 |
| e | 7.5 |
| dynamic-c-kn | 1.86 |
| static-c0-kn | 2.55 |
| static-mr-nm | 11.76 |
| static-mp-nm | 7.35 |
| static-my-nm | 7.35 |
| block-mass-kg | 0.016 |
| rail-mass-kg-per-m | 0.38 |
| pdf-page-offset | 3 |
| top-z | 10 |
| underside-z | 2 |
| datum-y | -10 |