Synthetic test carriage from MGN12C with changed mounting holes, not a vendor part
Use it
(import "parts/linear-rail/record-variants.ik" as p)
In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| block-width | 27 |
| block-length | 34.7 |
| core-length | 21.7 |
| overall-height | 13 |
| block-underside | 3 |
| top-plate | 2.5 |
All 20 numbers in its record
| mount-b | 16, 16 |
| mount-c | 12, 12 |
| thread-depth | 4, 4 |
| mount-thread-diameter | 2.5, 2.5 |
| mount-thread-pitch | 0.45, 0.45 |
| block-width | 27 |
| block-length | 34.7 |
| core-length | 21.7 |
| overall-height | 13 |
| block-underside | 3 |
| top-plate | 2.5 |
| grease-hole-diameter | 2 |
| grease-hole-height | 11.5 |
| running-clearance | 0.2 |
| corner-radius | 0.8 |
| seal-lip | 0.2 |
| seal-width | 1.2 |
| cap-screw-y | 9.5 |
| cap-screw-z | 5.5 |
| grease-hole-depth | 1.5 |