AS568-210 O-ring, 0.734 in ID × 0.139 in cross-section (18.64×3.53 mm)
oring
Use it
(import "parts/oring/AS568-210.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| id | 18.6436 |
| cs | 3.5306 |
All 24 numbers in its record
| id | 18.6436 |
| cs | 3.5306 |
| nominal | 18.6436, 3.5306 |
| deviations | -0.254, 0.254, -0.1016, 0.1016 |
| min | 18.3896, 3.429 |
| max | 18.8976, 3.6322 |
| outer_diameter | 25.7048 |
| centreline_diameter | 22.1742 |
| housing_depth | 2.7, 3.1 |
| groove_width | 4.8, 4.8, 5 |
| width_deviations | 0, 0.25, 0, 0.25, 0, 0.2 |
| depth | 2.7 |
| depth_deviations | 0, 0.1 |
| corner_radius | 0.6 |
| radius_deviations | -0.2, 0.2 |
| inch_to_mm | 25.4 |
| max_pressure_bar | 103.5 |
| backup_rings | 0 |
| dash_range | 201, 284, 201, 222, 201, 284, 201, 284 |
| gland_depth_range | 2.8194, 2.8702, 3.0734, 3.1242 |
| groove_width_range | 4.7498, 4.8768, 4.7498, 4.8768, 4.4958, 4.7498, 4.0132, 4.1656 |
| depth_range | 2.5654, 2.7178, 2.5654, 2.7178 |
| corner_radius_range | 0.254, 0.635 |
| diametral_clearance_range | 0.0762, 0.1524 |