AS568-426 O-ring, 4.600 in ID × 0.275 in cross-section (116.84×6.99 mm)
oring
Use it
(import "parts/oring/AS568-426.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| id | 116.84 |
| cs | 6.985 |
All 24 numbers in its record
| id | 116.84 |
| cs | 6.985 |
| nominal | 116.84, 6.985 |
| deviations | -0.8382, 0.8382, -0.1524, 0.1524 |
| min | 116.0018, 6.8326 |
| max | 117.6782, 7.1374 |
| outer_diameter | 130.81 |
| centreline_diameter | 123.825 |
| housing_depth | 5.8, 6.1 |
| groove_width | 9.5, 9.5, 9.7 |
| width_deviations | 0, 0.25, 0, 0.25, 0, 0.2 |
| depth | 5.8 |
| depth_deviations | 0, 0.1 |
| corner_radius | 1 |
| radius_deviations | -0.2, 0.2 |
| inch_to_mm | 25.4 |
| max_pressure_bar | 103.5 |
| backup_rings | 0 |
| dash_range | 425, 475, 425, 460, 425, 475, 425, 475 |
| gland_depth_range | 5.7404, 5.8166, 6.0198, 6.096 |
| groove_width_range | 9.525, 9.652, 9.525, 9.652, 8.6868, 9.1948, 7.8486, 7.9756 |
| depth_range | 5.1054, 5.3594, 5.1054, 5.3594 |
| corner_radius_range | 0.508, 0.889 |
| diametral_clearance_range | 0.1016, 0.1778 |