O-ring 26.64×2.62 mm (ID × cross-section), 31.88 mm OD, Trelleborg ORAR00121
oring
Use it
(import "parts/oring/METRIC-26.64x2.62.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| id | 26.64 |
| cs | 2.62 |
All 24 numbers in its record
| id | 26.64 |
| cs | 2.62 |
| nominal | 26.64, 2.62 |
| deviations | -0.31, 0.31, -0.09, 0.09 |
| min | 26.33, 2.53 |
| max | 26.95, 2.71 |
| outer_diameter | 31.88 |
| centreline_diameter | 29.26 |
| housing_depth | 2, 2.25 |
| groove_width | 3.6, 3.6, 3.8 |
| width_deviations | 0, 0.25, 0, 0.25, 0, 0.2 |
| depth | 2 |
| depth_deviations | 0, 0.1 |
| corner_radius | 0.3 |
| radius_deviations | -0.2, 0.2 |
| inch_to_mm | 25.4 |
| max_pressure_bar | 103.5 |
| backup_rings | 0 |
| dash_range | 102, 178, 104, 116, 102, 178, 102, 178 |
| gland_depth_range | 2.0574, 2.1082, 2.2352, 2.286 |
| groove_width_range | 3.556, 3.683, 3.556, 3.683, 3.4544, 3.6068, 3.048, 3.175 |
| depth_range | 1.8796, 2.032, 1.8796, 2.032 |
| corner_radius_range | 0.127, 0.381 |
| diametral_clearance_range | 0.0508, 0.127 |