O-ring 29.87×1.78 mm (ID × cross-section), 33.43 mm OD, Trelleborg ORAR00025
oring
Use it
(import "parts/oring/METRIC-29.87x1.78.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| id | 29.87 |
| cs | 1.78 |
All 24 numbers in its record
| id | 29.87 |
| cs | 1.78 |
| nominal | 29.87, 1.78 |
| deviations | -0.34, 0.34, -0.08, 0.08 |
| min | 29.53, 1.7 |
| max | 30.21, 1.86 |
| outer_diameter | 33.43 |
| centreline_diameter | 31.65 |
| housing_depth | 1.3, 1.45 |
| groove_width | 2.4, 2.4, 2.6 |
| width_deviations | 0, 0.25, 0, 0.25, 0, 0.2 |
| depth | 1.3 |
| depth_deviations | 0, 0.1 |
| corner_radius | 0.3 |
| radius_deviations | -0.2, 0.2 |
| inch_to_mm | 25.4 |
| max_pressure_bar | 103.5 |
| backup_rings | 0 |
| dash_range | 4, 50, 6, 12, 4, 50, 4, 50 |
| gland_depth_range | 1.27, 1.3208, 1.397, 1.4478 |
| groove_width_range | 2.3622, 2.4892, 2.3622, 2.4892, 2.5654, 2.7178, 2.1336, 2.2606 |
| depth_range | 1.27, 1.3716, 1.27, 1.3716 |
| corner_radius_range | 0.127, 0.381 |
| diametral_clearance_range | 0.0508, 0.127 |