O-ring 30×1 mm (ID × cross-section), 32 mm OD, Trelleborg OR1003000
oring
Use it
(import "parts/oring/METRIC-30x1.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| id | 30 |
| cs | 1 |
All 15 numbers in its record
| id | 30 |
| cs | 1 |
| nominal | 30, 1 |
| deviations | -0.34, 0.34, -0.08, 0.08 |
| min | 29.66, 0.92 |
| max | 30.34, 1.08 |
| outer_diameter | 32 |
| centreline_diameter | 31 |
| housing_depth | 0.7 |
| groove_width | 1.4, 1.4 |
| width_deviations | 0, 0.25, 0, 0.2 |
| depth | 0.7 |
| depth_deviations | 0, 0.1 |
| corner_radius | 0.2 |
| radius_deviations | -0.2, 0.2 |