ISO 1234 0.8×6 split pin (cotter pin), 0.8 mm hole, 6 mm long

ISO1234

Use it

(import "parts/pin/ISO1234-0.8x6.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

diameter0.65
eye-extension2.4
eye-width1.3
leg-offset1.2
split-gap0.026

Frame of reference

stem/nominal hole axis +z, eye reference z=0, eye -z; SHORT leg length l, long leg l+a; bends in xz

All 11 numbers in its record
nominal-hole-diameter0.8
min0.6, 0.8, 1.2
max0.7, 1.6, 1.4
nominal2.4
diameter0.65
eye-extension2.4
eye-width1.3
leg-offset1.2
split-gap0.026
default-length-mm6
commercial-length-series-mm4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 32, 36, 40, 45, 50, 56, 63, 71, 80, 90, 100, 112, 125, 140, 160, 180, 200, 224, 250, 280