ISO 1234 10×40 split pin (cotter pin), 10 mm hole, 40 mm long

ISO1234

Use it

(import "parts/pin/ISO1234-10x40.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

diameter9.4
eye-extension20
eye-width17.8
leg-offset4.725
split-gap0.376

Frame of reference

stem/nominal hole axis +z, eye reference z=0, eye -z; SHORT leg length l, long leg l+a; bends in xz

All 11 numbers in its record
nominal-hole-diameter10
min9.3, 3.15, 16.6
max9.5, 6.3, 19
nominal20
diameter9.4
eye-extension20
eye-width17.8
leg-offset4.725
split-gap0.376
default-length-mm40
commercial-length-series-mm4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 32, 36, 40, 45, 50, 56, 63, 71, 80, 90, 100, 112, 125, 140, 160, 180, 200, 224, 250, 280