WCP-0318 GT2 3 mm timing pulley, 16 teeth, 15mm belt, Falcon 500 / Kraken spline (14 teeth) bore

WestCoast Products · MPN WCP-0318 · frc-pulley

Use it

(import "parts/pulley/WCP-0318.ik" as p)

In a design on ink: ask your agent for it by name, or by what it must be.

Dimensions

teeth	16
pitch	3
pitch-diameter	15.2789
tip-radius	7.2725
root-radius	6.0838
groove-depth	1.1887

Frame of reference

Axis z; back face z = 0, front face z = width; a tooth land tooth-clock degrees from +x.

Frames

Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.

Of	Frame	Origin	x	z
part	back	(0, 0, 0)	(1, 0, 0)	(0, 0, -1)
part	front	(0, 0, 30.1498)	(1, 0, 0)	(0, 0, 1)

All 32 numbers in its record

teeth	16
pitch	3
pitch-diameter	15.2789
tip-radius	7.2725
root-radius	6.0838
groove-depth	1.1887
tooth-clock	-11.25
groove-half-profile	0, 1.18872, -0.359108, 0.9525, 0.40334, 0.459102, 1.30502, 0.11805, 0
groove-polygon	-1.30502, 0.11805, 0.459102, -0.9525, 0.40334, -0.359108, 0, 1.18872, -0.359108, 0.9525, 0.40334, 0.459102, 1.30502, 0.11805, 0, 1.91879, 0.11805, 0, 1.91879, -1, 0, -1.91879, -1, 0
teeth-z0	2.0569
teeth-z1	28.0929
width	30.1498
section	8.4912, 29.425, 8.75, 28.459, 7.3817, 28.0924, 5.8, 28.0924, 5.8, 29.0924, 7.25, 29.0924, 8.4912, 0.7248, 8.75, 1.6908, 7.3817, 2.0574, 5.8, 2.0574, 5.8, 1.0574, 7.25, 1.0574, 0, 0, 5.8, 0, 5.8, 2.0574, 6.0838, 2.0574, 6.0838, 28.0924, 5.8, 28.0924, 5.8, 30.1498, 0, 30.1498
outer-diameter	17.5
bore-af	0
bore-round	0
bore-clock	12.8571
spline-teeth	14
spline-module	0.5
spline-pa	30
spline-backlash	0
spline-minor	6.5786
spline-major	7.9764
key-width	0
key-depth	0
key-angle	0
notch-width	1.5875
notch-depth	1.0575
notch-faces	1
notch-angle	90
hub-diameter	11.6
mass-g	10.43