WCP-0664 GT2 3 mm timing pulley, 48 teeth, 9mm belt, 1/2 in hex bore
WestCoast Products · MPN WCP-0664 · frc-pulley
Use it
(import "parts/pulley/WCP-0664.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 48 |
| pitch | 3 |
| pitch-diameter | 45.8366 |
| tip-radius | 22.5425 |
| root-radius | 21.3741 |
| groove-depth | 1.1684 |
Frame of reference
Axis z; back face z = 0, front face z = width; a tooth land tooth-clock degrees from +x.
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| part | back | (0, 0, 0) | (1, 0, 0) | (0, 0, -1) |
| part | front | (0, 0, 15.875) | (1, 0, 0) | (0, 0, 1) |
All 32 numbers in its record
| teeth | 48 |
| pitch | 3 |
| pitch-diameter | 45.8366 |
| tip-radius | 22.5425 |
| root-radius | 21.3741 |
| groove-depth | 1.1684 |
| tooth-clock | -3.75 |
| groove-half-profile | 0, 1.1684, -0.339249, 0.93703, 0.44994, 0.005721, 1.00781, 0.19812, 0.183236, 1.13607, 0.02865, 0 |
| groove-polygon | -1.13607, 0.02865, 0.183236, -1.00781, 0.19812, 0.005721, -0.93703, 0.44994, -0.339249, 0, 1.1684, -0.339249, 0.93703, 0.44994, 0.005721, 1.00781, 0.19812, 0.183236, 1.13607, 0.02865, 0, 1.97435, 0.02865, 0, 1.97435, -1, 0, -1.97435, -1, 0 |
| teeth-z0 | 2.6035 |
| teeth-z1 | 13.2715 |
| width | 15.875 |
| section | 25.5, 14.8074, 25.5, 13.7721, 23.6317, 13.2715, 19.5, 13.2715, 19.5, 14.2715, 23.5, 14.2715, 16.891, 4.5562, 16.891, 0.7938, 19.5, 0.7938, 19.5, 2.6035, 21.3741, 2.6035, 21.3741, 13.2715, 19.5, 13.2715, 19.5, 15.0812, 16.891, 15.0812, 16.891, 11.3188, 16.8718, 11.1237, 16.8149, 10.9361, 16.7225, 10.7632, 16.5981, 10.6116, 16.4466, 10.4873, 16.2737, 10.3949, 16.0861, 10.338, 15.891, 10.3188, 9.89, 10.3188, 9.6949, 10.338, 9.5073, 10.3949, 9.3344, 10.4873, 9.1829, 10.6116, 9.0585, 10.7632, 8.9661, 10.9361, 8.9092, 11.1237, 8.89, 11.3188, 8.89, 15.875, 0, 15.875, 0, 0, 8.89, 0, 8.89, 4.5562, 8.9092, 4.7513, 8.9661, 4.9389, 9.0585, 5.1118, 9.1829, 5.2634, 9.3344, 5.3877, 9.5073, 5.4801, 9.6949, 5.537, 9.89, 5.5562, 15.891, 5.5562, 16.0861, 5.537, 16.2737, 5.4801, 16.4466, 5.3877, 16.5981, 5.2634, 16.7225, 5.1118, 16.8149, 4.9389, 16.8718, 4.7513, 25.5, 1.0676, 25.5, 2.1029, 23.6317, 2.6035, 19.5, 2.6035, 19.5, 1.6035, 23.5, 1.6035 |
| outer-diameter | 51 |
| bore-af | 12.8016 |
| bore-round | 0 |
| bore-clock | 30 |
| spline-teeth | 0 |
| spline-module | 0 |
| spline-pa | 0 |
| spline-backlash | 0 |
| spline-minor | 0 |
| spline-major | 0 |
| key-width | 0 |
| key-depth | 0 |
| key-angle | 0 |
| notch-width | 0 |
| notch-depth | 0 |
| notch-faces | 1 |
| notch-angle | 90 |
| hub-diameter | 0 |
| mass-g | 36.29 |