WCP-0665 GT2 3 mm timing pulley, 60 teeth, 9mm belt, 1/2 in hex bore
WestCoast Products · MPN WCP-0665 · frc-pulley
Use it
(import "parts/pulley/WCP-0665.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| teeth | 60 |
| pitch | 3 |
| pitch-diameter | 57.2958 |
| tip-radius | 28.27 |
| root-radius | 26.99 |
| groove-depth | 1.28 |
Frame of reference
Axis z; back face z = 0, front face z = width; a tooth land tooth-clock degrees from +x.
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| part | back | (0, 0, 0) | (1, 0, 0) | (0, 0, -1) |
| part | front | (0, 0, 15.875) | (1, 0, 0) | (0, 0, 1) |
All 32 numbers in its record
| teeth | 60 |
| pitch | 3 |
| pitch-diameter | 57.2958 |
| tip-radius | 28.27 |
| root-radius | 26.99 |
| groove-depth | 1.28 |
| tooth-clock | -3 |
| groove-half-profile | 0, 1.28, -0.378866, 0.90322, 0.4809, 0, 0.92663, 0.29025, 0.391437, 1.23752, 0.0271, 0 |
| groove-polygon | -1.23752, 0.0271, 0.391437, -0.92663, 0.29025, 0, -0.90322, 0.4809, -0.378866, 0, 1.28, -0.378866, 0.90322, 0.4809, 0, 0.92663, 0.29025, 0.391437, 1.23752, 0.0271, 0, 1.97954, 0.0271, 0, 1.97954, -1, 0, -1.97954, -1, 0 |
| teeth-z0 | 2.6035 |
| teeth-z1 | 13.2715 |
| width | 15.875 |
| section | 30.5, 14.8498, 30.5, 13.8145, 28.4734, 13.2715, 24.5, 13.2715, 24.5, 14.2715, 28.3417, 14.2715, 21.8948, 4.5562, 21.8948, 0.7938, 24.4983, 0.7938, 24.4983, 2.6035, 26.99, 2.6035, 26.99, 13.2715, 24.4983, 13.2715, 24.4983, 15.0812, 21.8948, 15.0812, 21.8948, 11.3188, 21.8756, 11.1237, 21.8187, 10.9361, 21.7263, 10.7632, 21.6019, 10.6116, 21.4504, 10.4873, 21.2775, 10.3949, 21.0899, 10.338, 20.8948, 10.3188, 9.89, 10.3188, 9.6949, 10.338, 9.5073, 10.3949, 9.3344, 10.4873, 9.1829, 10.6116, 9.0585, 10.7632, 8.9661, 10.9361, 8.9092, 11.1237, 8.89, 11.3188, 8.89, 15.875, 0, 15.875, 0, 0, 8.89, 0, 8.89, 4.5562, 8.9092, 4.7513, 8.9661, 4.9389, 9.0585, 5.1118, 9.1829, 5.2634, 9.3344, 5.3877, 9.5073, 5.4801, 9.6949, 5.537, 9.89, 5.5562, 20.8948, 5.5562, 21.0899, 5.537, 21.2775, 5.4801, 21.4504, 5.3877, 21.6019, 5.2634, 21.7263, 5.1118, 21.8187, 4.9389, 21.8756, 4.7513, 30.5, 1.0252, 30.5, 2.0605, 28.4734, 2.6035, 24.5, 2.6035, 24.5, 1.6035, 28.3417, 1.6035 |
| outer-diameter | 61 |
| bore-af | 12.8016 |
| bore-round | 0 |
| bore-clock | 30 |
| spline-teeth | 0 |
| spline-module | 0 |
| spline-pa | 0 |
| spline-backlash | 0 |
| spline-minor | 0 |
| spline-major | 0 |
| key-width | 0 |
| key-depth | 0 |
| key-angle | 0 |
| notch-width | 0 |
| notch-depth | 0 |
| notch-faces | 1 |
| notch-angle | 90 |
| hub-diameter | 0 |
| mass-g | 54.43 |