Traxxas 3695 Magnum 272 transmission: case, motor plate, slipper and output yokes
Traxxas · traxxas-transmission
Use it
(import "parts/traxxas/3695.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| case-width | 32 |
| output-z | 23 |
| input-x | 20 |
| input-z | 45 |
| base-x | 56 |
| base-y | 58 |
Frame of reference
x rearwards, y transverse, z up. Bottom z=0. Diff axis y through (0,0,23). Motor mounting face y=16.5 (plate centre 18), motor extends toward -y; input axis (20,*,45).
All 84 numbers in its record
| top-mounts | -14, -11, -14, 11 |
| case-width | 32 |
| output-z | 23 |
| input-x | 20 |
| input-z | 45 |
| base-x | 56 |
| base-y | 58 |
| base-thickness | 7 |
| diff-radius | 21 |
| input-radius | 9, 27 |
| mounts | -10, -20, 0, 4, 6, -10, 20, 0, 4, 6 |
| hinge-bore | 3.2 |
| hinge-y | 25 |
| hinge-z | 3.5 |
| plate-radius | 22 |
| plate-thickness | 3 |
| plate-y | 18, 16.5, 19.5 |
| motor-x | 40 |
| motor-z | 25 |
| motor-clear-radius | 7 |
| slot-width | 3.5, 3.5 |
| slots | 34, 12.3, 46, 12.3, 34, 37.7, 46, 37.7 |
| slipper-radius | 15, 15 |
| slipper-width | 8, 8 |
| slipper-y | 26 |
| yoke-od | 11 |
| yoke-length | 13 |
| yoke-gap | 5 |
| joint-pin | 2.6 |
| yoke-cross-y | 30 |
| cover-radius | 27 |
| cover-depth | 23 |
| cover-y | 31 |
| output-relief-diameter | 8.4 |
| spur-register-diameter | 11.9 |
| spur-register-y0 | 3.5 |
| spur-register-y1 | 9 |
| spur-mount-pcd | 21 |
| spur-mount-hole | 3.2 |
| spur-mount-count | 3 |
| motor-window-x0 | 34 |
| motor-window-x1 | 46 |
| cover-mounts | 5, 62, 52, 15 |
| cover-bore | 3.2, 3.2 |
| cover-counterbore | 5.6 |
| cover-counterbore-bottom-y | 24 |
| plate-pilot-bore | 2.5, 2.5 |
| cover-motor-radius | 14 |
| cover-wall | 1.8 |
| top-thread-diameter | 3 |
| top-thread-pitch | 0.5 |
| top-thread-depth | 8 |
| top-mount-z | 41 |
| value | -14, -11, -14, 11, 32, 23, 20, 45, 56, 58, 7, 21, 9, -10, -20, 0, 4, 6, -10, 20, 0, 4, 6, 3.2, 25, 3.5, 22, 3, 18, 40, 25, 7, 3.5, 34, 12.3, 46, 12.3, 34, 37.7, 46, 37.7, 15, 8, 26, 11, 13, 5, 2.6, 30, 27, 23, 31, 0.002, 8.4, -10, -20, 0, 4, 6, -10, 20, 0, 4, 6 |
| ratio | 2.72 |
| centres | -14, -11, 41, -14, 11, 41, 0, -25, 3.5, 0, 25, 3.5 |
| depth | 8 |
| centre-xz | 20, 45 |
| back-face-y | 30 |
| register-diameter | 11.9 |
| register-y | 29.5, 35 |
| mount-pcd | 21 |
| holes | 3 |
| hole-diameter | 3.2 |
| angles | 0, 120, 240 |
| cross-centres | 0, -30, 23, 0, 30, 23 |
| cross-pin | 2.5 |
| fork-gap | 5 |
| fork-od | 11 |
| face-y | 16.5 |
| thickness | 3 |
| shaft-window-centre | 40, 18, 25 |
| radius | 7 |
| end-centres-xz | 34, 25, 46, 25 |
| slot-centre-segments-xz | 34, 12.3, 46, 12.3, 34, 37.7, 46, 37.7 |
| centres-xz | 5, 62, 52, 15 |
| counterbore | 5.6 |
| counterbore-bottom-y | 24 |
| motor-radius | 14 |
| y-range | 19.5, 42.5 |
| radial-wall | 1.8 |
| back-wall | 1.3 |
| centre | 20, 26, 45 |
| bore | 3.2 |