printer-parts
79 parts. Import one as (import "parts/printer-parts/NAME.ik" as p).
| Part | Name | Maker | |
|---|---|---|---|
| BED-KNOB-M3 | M3 bed adjustment knob, 40 mm diameter, 8 mm tall (generic design) | ||
| BED-KNOB-M4 | M4 bed adjustment knob, 40 mm diameter, 8 mm tall (generic design) | ||
| BED-SPRING-8x20 | Creality bed leveling spring, 8 mm OD, 4 mm ID, 20 mm free length | ||
| BED-SPRING-8x25 | Creality bed leveling spring, 8 mm OD, 4 mm ID, 25 mm free length | ||
| BLTOUCH-V2-DEPLOYED | ANTCLABS BLTouch V2 touch probe, pin deployed, 7.5 mm stroke | ||
| BLTOUCH-V2-STOWED | ANTCLABS BLTouch V2 touch probe, pin stowed, 7.5 mm stroke | ||
| BLTOUCH-V3.1-DEPLOYED | ANTCLABS BLTouch V3.1 touch probe, pin deployed, 6.3 mm stroke | ||
| BLTOUCH-V3.1-STOWED | ANTCLABS BLTouch V3.1 touch probe, pin stowed, 6.3 mm stroke | ||
| BMG-DRIVE-PRIMARY | Bondtech BMG primary drive gear, 17 teeth, 9.5 mm diameter, 5 mm bore, 14 mm long | ||
| BMG-DRIVE-SECONDARY | Bondtech BMG secondary drive gear, 17 teeth, 9.5 mm diameter, 5 mm bore, 14 mm long | ||
| BONDTECH-11044H-REVERSORT | Bondtech 11044H ReversORT drive gear, 9.5 mm diameter, 27 mm long | ||
| BONDTECH-15001-MAIN-GEAR | Bondtech 15001 main gear, 50 teeth, 26 mm diameter, 5 mm bore, 7 mm long | ||
| BONDTECH-BMG-LH | Bondtech BMG extruder, left-hand | ||
| BONDTECH-BMG-RH | Bondtech BMG extruder, right-hand | ||
| CAPRICORN-XS-100 | Capricorn XS tube, 4 mm OD, 1.9 mm ID, 100 mm long | ||
| CAPRICORN-XS-800 | Capricorn XS tube, 4 mm OD, 1.9 mm ID, 800 mm long | ||
| CREALITY-MK8-DRIVE-GEAR | Creality MK8 drive gear, 10.95 mm diameter, 5 mm bore, 10.9 mm long | ||
| CREALITY-MK8-HOTEND | Creality MK8 hotend, 0.4 mm nozzle | ||
| E3D-REVO-SIX | E3D Revo Six hotend, 0.4 mm nozzle, 62 mm tall | ||
| E3D-REVO-VORON | E3D Revo Voron hotend, 0.4 mm nozzle, 48.8 mm tall | ||
| E3D-V6-BLOCK | E3D V6 heater block, 16×23×11.5 mm | ||
| E3D-V6-HEATBREAK-175 | E3D V6 heatbreak, 1.75 mm filament, 22.1 mm long | ||
| E3D-V6-HEATBREAK-300 | E3D V6 heatbreak, 3 mm filament, 25.3 mm long | ||
| E3D-V6-HEATSINK | E3D V6 hotend heatsink, 22.3 mm diameter, 42.7 mm long | ||
| E3D-V6-HOTEND | E3D V6 hotend, 0.4 mm nozzle, 62.3 mm tall | ||
| E3D-VOLCANO-BLOCK | E3D Volcano heater block, 20×16×21.2 mm | ||
| EUCLID-PROBE-V4 | Euclid Probe V4 magnetic bed probe | ||
| FOTEK-SND04-N | Fotek SND04-N rectangular inductive proximity sensor, 18×30.5×10 mm | ||
| HEATER-6x15 | Phaetus heater cartridge, 6×15 mm | ||
| HEATER-6x20 | Phaetus heater cartridge, 6×20 mm | ||
| KLICKY-PROBE-V2 | Klicky Probe V2 magnetic bed probe | ||
| LJ12A3-4-Z-BX | LJ12A3-4-Z-BX inductive probe, M12, 58 mm long | ||
| MAGNET-BASE-235 | FYSETC magnetic base sheet, 235×235×1 mm | ||
| MAGNET-BASE-300 | FYSETC magnetic base sheet, 300×300×1 mm | ||
| MAGNET-BASE-350 | FYSETC magnetic base sheet, 350×350×1 mm | ||
| MK8-NOZZLE-0.20 | MK8 nozzle, 0.2 mm orifice, 6 mm hex, 13 mm long | ||
| MK8-NOZZLE-0.25 | MK8 nozzle, 0.25 mm orifice, 6 mm hex, 13 mm long | ||
| MK8-NOZZLE-0.30 | MK8 nozzle, 0.3 mm orifice, 6 mm hex, 13 mm long | ||
| MK8-NOZZLE-0.40 | MK8 nozzle, 0.4 mm orifice, 6 mm hex, 13 mm long | ||
| MK8-NOZZLE-0.60 | MK8 nozzle, 0.6 mm orifice, 6 mm hex, 13 mm long | ||
| MK8-NOZZLE-0.80 | MK8 nozzle, 0.8 mm orifice, 6 mm hex, 13 mm long | ||
| MK8-NOZZLE-1.00 | MK8 nozzle, 1 mm orifice, 6 mm hex, 13 mm long | ||
| ORBITER-2.0 | Orbiter 2.0 extruder | ||
| PC4-M10-NOMINAL | PC4 M10 straight pneumatic fitting, M10×1 thread, 12 mm hex (generic design) | ||
| PC4-M6 | GINIER PC4 M6 straight pneumatic fitting, M6×1 thread, 10 mm hex | ||
| PEI-STEEL-235 | FYSETC PEI steel build plate, 235×235×0.5 mm | ||
| PEI-STEEL-300 | FYSETC PEI steel build plate, 300×300×0.5 mm | ||
| PEI-STEEL-350 | FYSETC PEI steel build plate, 350×350×0.5 mm | ||
| PHAETUS-DRAGON-ST | Phaetus Dragon ST hotend, 0.4 mm nozzle, 62.2 mm tall | ||
| PHAETUS-DRAGON-VORON-ST | Phaetus Dragon Voron ST hotend, 0.4 mm nozzle, 45.5 mm tall | ||
| PHAETUS-DRAGONFLY-BMO | Phaetus Dragonfly BMO hotend, 0.4 mm nozzle, 62.3 mm tall | ||
| PINDA-M8-NOMINAL | PINDA inductive probe, M8, 35 mm long (generic design) | ||
| PRUSA-MK52-24V-05D | Prusa MK52 24V 05D heatbed PCB, 1.6 mm thick | ||
| PRUSA-MK52-STEEL-SHEET | Prusa MK52 spring steel sheet, 0.5 mm thick | ||
| PRUSA-SUPERPINDA-4026 | Prusa SuperPINDA 4026 inductive probe, M8, 34 mm long | ||
| PTFE-2x4-100 | PTFE tube, 4 mm OD, 2 mm ID, 100 mm long | ||
| PTFE-2x4-800 | PTFE tube, 4 mm OD, 2 mm ID, 800 mm long | ||
| SHERPA-MINI | Annex Sherpa Mini extruder | ||
| SHERPA-RIDGA-HOB-BLANK | Bondtech Sherpa RIDGA drive gear hob blank, 8 mm diameter, 5 mm bore | ||
| SHERPA-RIDGA-V2-COMPLETE | Bondtech Sherpa RIDGA V2 drive gear, 50 teeth, 26 mm diameter, 26.6 mm long | ||
| SILICONE-SPACER-16 | Silicone bed spacer, 16 mm OD, 4 mm ID, 16 mm long | ||
| SILICONE-SPACER-18 | Silicone bed spacer, 16 mm OD, 4 mm ID, 18 mm long | ||
| THERMISTOR-3x15 | E3D thermistor sensor cartridge, 3×15 mm | ||
| V6-NOZZLE-0.20 | V6 nozzle, 0.2 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-0.25 | V6 nozzle, 0.25 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-0.30 | V6 nozzle, 0.3 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-0.40 | V6 nozzle, 0.4 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-0.50 | V6 nozzle, 0.5 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-0.60 | V6 nozzle, 0.6 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-0.80 | V6 nozzle, 0.8 mm orifice, 7 mm hex, 12.5 mm long | ||
| V6-NOZZLE-1.00 | V6 nozzle, 1 mm orifice, 7 mm hex, 12.5 mm long | ||
| VOLCANO-NOZZLE-0.20 | Volcano nozzle, 0.2 mm orifice, 7 mm hex, 21 mm long | ||
| VOLCANO-NOZZLE-0.40 | Volcano nozzle, 0.4 mm orifice, 7 mm hex, 21 mm long | ||
| VOLCANO-NOZZLE-0.60 | Volcano nozzle, 0.6 mm orifice, 7 mm hex, 21 mm long | ||
| VOLCANO-NOZZLE-0.80 | Volcano nozzle, 0.8 mm orifice, 7 mm hex, 21 mm long | ||
| VOLCANO-NOZZLE-1.00 | Volcano nozzle, 1 mm orifice, 7 mm hex, 21 mm long | ||
| VORON-TAP-R8-CENTER | Voron TAP R8 center part, printed ABS, 20.7 mm deep | ||
| VORON-TAP-R8-FRONT | Voron TAP R8 front part, printed ABS, 11.798 mm deep | ||
| parametric-example | parametric-example.ik |