E3D V6 hotend, 0.4 mm nozzle, 62.3 mm tall
hotend
Use it
(import "parts/printer-parts/E3D-V6-HOTEND.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| height | 62.3 |
| sink-bottom | 19.6 |
| sink-top | 62.3 |
| bridge-radius | 2.5 |
| block-width | 16 |
| block-depth | 23 |
All 45 numbers in its record
| height | 62.3 |
| sink-bottom | 19.6 |
| sink-top | 62.3 |
| length | 42.7, 12.5 |
| diameter | 22.3 |
| fin-length | 26 |
| fin-pitch | 2.5 |
| fin-thickness | 1 |
| fin-count | 11 |
| core-radius | 6.3 |
| groove-lower-z | 30 |
| groove-start | 33 |
| groove-end | 39 |
| bore | 4.2, 2 |
| lower-bore | 2 |
| lower-bore-depth | 15.1 |
| bridge-radius | 2.5 |
| block-width | 16 |
| block-depth | 23 |
| block-x | 0 |
| block-y | 3.5 |
| block-bottom | 4 |
| block-top | 15.5 |
| mount-style | 0 |
| mount-width | 14 |
| mount-depth | 16 |
| mount-holes | 0, 0 |
| mount-hole-core | 2.1 |
| mount-hole-depth | 4 |
| orifice | 0.4, 0.4 |
| hex-start | 2 |
| hex-end | 5 |
| thread-start | 6.5 |
| af | 7 |
| tip-diameter | 1 |
| orifice-land | 0.6 |
| neck-radius | 2.5 |
| cone-slope | 0.5773503 |
| inner-cone-slope | 0.5773503 |
| mount-radius | 11 |
| visual-style | 0 |
| height-mm | -0.5, 0.5 |
| nozzle-tip | 0, 0, 0 |
| filament-axis | 0, 0, 1 |
| mount-face-z | 62.3 |