Phaetus Dragon Voron ST hotend, 0.4 mm nozzle, 45.5 mm tall
hotend
Use it
(import "parts/printer-parts/PHAETUS-DRAGON-VORON-ST.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| height | 45.5 |
| sink-bottom | 19.5 |
| sink-top | 45.5 |
| bridge-radius | 2.5 |
| block-width | 19 |
| block-depth | 26.3 |
All 51 numbers in its record
| height | 45.5 |
| sink-bottom | 19.5 |
| sink-top | 45.5 |
| length | 26, 12.5 |
| diameter | 22 |
| fin-length | 22 |
| fin-pitch | 2 |
| fin-thickness | 0.85 |
| fin-count | 11 |
| core-radius | 4.6 |
| groove-lower-z | 0 |
| groove-start | 27 |
| groove-end | 28 |
| bore | 2, 2 |
| lower-bore | 2 |
| lower-bore-depth | 1 |
| bridge-radius | 2.5 |
| block-width | 19 |
| block-depth | 26.3 |
| block-x | 0 |
| block-y | 0 |
| block-bottom | 4 |
| block-top | 18.5 |
| mount-style | 1 |
| mount-width | 14 |
| mount-depth | 16 |
| mount-holes | -5.656854, -5.656854, -5.656854, 5.656854, 5.656854, -5.656854, 5.656854, 5.656854 |
| mount-hole-core | 2.1 |
| mount-hole-depth | 4 |
| orifice | 0.4, 0.4 |
| hex-start | 2 |
| hex-end | 5 |
| thread-start | 6.5 |
| af | 7 |
| tip-diameter | 1 |
| orifice-land | 0.6 |
| neck-radius | 2.5 |
| cone-slope | 0.5773503 |
| inner-cone-slope | 0.5773503 |
| mount-radius | 11 |
| visual-style | 2 |
| window-width | 9 |
| window-bottom | 22.5 |
| window-top | 42.5 |
| integer | 0.2 |
| one_decimal | 0.1 |
| two_decimal | 0.05 |
| angle_deg | 1 |
| nozzle-tip | 0, 0, 0 |
| filament-axis | 0, 0, 1 |
| mount-face-z | 45.5 |