Redux canandgyro CAN 2.0B inertial measurement unit, V1.0 housing
MPN REDUX-CANANDGYRO · sensor-imu
Use it
(import "parts/sensor/REDUX-CANANDGYRO.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| width | 35.4 |
| length | 37 |
| corner-radius | 4 |
| bottom | -5 |
| top | 12.9 |
| pocket-floor | 7.7 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| sensor | mount | (0, 0, -5) | (1, 0, 0) | (0, 0, -1) |
All 52 numbers in its record
| width | 35.4, 9.94, 2.8 |
| length | 37 |
| corner-radius | 4 |
| bottom | -5 |
| top | 12.9 |
| pocket-floor | 7.7 |
| pockets | 12.471, 12.591, -12.429, -12.309 |
| pocket-inner-radius | 4 |
| pocket-edge-radius | 1 |
| mount-holes | -12.679, -12.559, 12.721, 12.841 |
| hole-radius | 2.15265, 0.7 |
| board-hole-radius | 2.15 |
| board-z | 0, 1.6 |
| x | 16.95, 16.95 |
| y | 3.3, 3.3 |
| z | 3.38, 10.18, 5.05, 8.25 |
| height | 4.16 |
| radius | 1.7, 1.7 |
| mouth-radius | 0.25 |
| depth | 0.75 |
| recess-x | -16.9572 |
| recess-y | 0.7966 |
| recess-z | 3.825 |
| recess-width | 15.7 |
| recess-height | 13.65 |
| front | -19.0572 |
| back | -16.95 |
| first-y | -4.4534 |
| pitch | 3.5 |
| count | 4 |
| hole-z | 7.2 |
| flare-depth | 0.5 |
| flare-slope | 0.5773503 |
| flare-half-width | 0.3 |
| flare-floor | 5.35 |
| bottom-slot-width | 1.88 |
| bottom-slot-depth | 1.793 |
| bottom-slot-top | 5.35 |
| stem-front | -17.0572 |
| stem-z | 2.25, 8.25 |
| stem-y | -6.5534, 8.1466 |
| edge-chamfer | 0.75 |
| mass-g | 17 |
| supply-voltage-v | 4.3, 16 |
| surge-voltage-v | 20 |
| surge-duration-s | 5 |
| current-ma-typical | 40 |
| temperature-c | -30, 70 |
| max-angular-rate-deg-s | 2000 |
| max-acceleration-g | 16 |
| static-drift-deg-h-typical | 0.2 |
| pitch-roll-static-accuracy-deg-typical | 0.2 |