REV Analog Pressure Sensor, 0–200 PSI, 1/8 NPT, 5 V
MPN REV-11-1107 · sensor-pressure
Use it
(import "parts/sensor/REV-11-1107.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| wrench-af | 23.75 |
| wrench-corner-radius | 1 |
| shoulder-radius | 10 |
| lower-chamfer-slope | 1 |
| upper-radius | 11.5 |
| upper-fillet-radius | 0.5 |
Frames
Where it connects: each frame sits on the face it connects by, z out of the part, in the part's own coordinates.
| Of | Frame | Origin | x | z |
|---|---|---|---|---|
| sensor | port | (0, 0, -10) | (1, 0, 0) | (0, 0, -1) |
| sensor | connector | (0, 0, 39) | (1, 0, 0) | (0, 0, 1) |
All 40 numbers in its record
| wrench-af | 23.75 |
| wrench-corner-radius | 1 |
| hex-z | 3.35, 12.5 |
| shoulder-radius | 10 |
| shoulder-z | 0, 1.35 |
| lower-chamfer-slope | 1 |
| upper-radius | 11.5 |
| upper-z | 13, 16.5 |
| upper-fillet-radius | 0.5 |
| cap-fillet-radius | 1.5 |
| cap-end-z | 18 |
| stem-radius | 6.5 |
| stem-z | 18, 29 |
| socket-radius | 8 |
| socket-z | 29, 39 |
| socket-bores | 4.5, 17.5, 31, 7, 31, 40 |
| pressure-bore | 1.5, -11, 5 |
| thread-taper-angle | 2 |
| thread-taper-radius | 5 |
| thread-tip-z | -10 |
| thread-tip-fillet | 1 |
| thread-tip-fillet-major | 3.685104 |
| thread-tip-fillet-z | -9 |
| thread-tip-tangent-z | -9.034899 |
| thread-root-fillet | 0.5 |
| thread-root-fillet-major | 5.482844 |
| thread-root-fillet-z | -0.5 |
| thread-root-tangent-z | -0.4825503 |
| pins | -2, -1.154701, 0, 2.309401, 2, -1.154701 |
| pin-size | 0.75, 1 |
| pin-z | 17.5, 25.5 |
| supply-voltage-v | 5 |
| output-voltage-v | 0.5, 4.5 |
| current-ma-max | 10 |
| response-ms-max | 2 |
| working-psi | 0, 200 |
| max-force-psi | 348 |
| accuracy-percent | 1.5 |
| mass-g | 40.8233 |
| temperature-c | 0, 85 |